Trane VUV Installation, Operation And Maintenance Manual page 52

Installation - Controls
Deleting Programs
1. Press the Menu button and then press OK until the ON
hour time display of the program you want to delete is
blinking.
2. Use the + / - to select -- and then press OK.
Important: Switching programs must be deleted in ON-OFF
pairs. When you delete a single ON instruction,
you must also delete the corresponding OFF
instruction.
Daylight Savings Time
Note: Use +1h button to make the change to and from
Daylight Savings Time.
• Press the +1h button to add 1 hour to the current time.
Press the +1h button again to subtract 1 hour from the
current time.
Figure 63. Daylight savings time
Override Program (Manual)
To override the program, press the OVR (+) button.
Toggle between the unoccupied
pressing the OVR (+) button.
Note: When you override the program, the override remains
in effect until the next programming event or until you
press OVR again.
52
and occupied states by
UV-SVX005G-EN