Trane VUV Installation, Operation And Maintenance Manual page 49

Figure 57. Locking and unlocking settings
Note: If you try to access a feature that is locked, the locked
symbol will appear on the display. If you press a
keypad button to try change a locked setting, the
locked symbol will flash.
WDS Operating Mode
This section describes how to operate the wireless display
sensor (WDS). Figure 58, p. 49
that has been configured and is in operating mode.
Figure 58. Wireless display sensor (model WDS) in
operating mode
Temperature
Fan settings
Test symbols
(appear when Test
button is pushed)
Occupancy
indicator/
Error code
Keypad
Test button
UV-SVX005G-EN
shows an example of a WDS
.
Changing Room Temperature
This symbol shows
the current room
.
temperature, or
your setpoint
selection while you
are making an
adjustment.
When you select a
setpoint, this
symbol appears.
Changing Heating/Cooling Settings
(does not apply to all systems)
Some systems allow you
to select both heating and
cooling room temperature
settings. If your system
has this option, this
symbol appears when
you adjust the
temperature setting.
When you adjust the
cooling setting, the top
arrow and snowflake
flash.
When you adjust the
heating setting, the
bottom arrow and flame
flash.
Changing Fan Settings
Indicates that the fan
will operate as
needed to reach the
Fan Menu
selected
temperature.
Indicates that the fan
setting is On.
The number of arrows
indicates fan speed
(3: high, 2: medium, 1:
low).
The example shown
indicates a fan on
high speed. Not all
systems offer all three
speeds.
Indicates that the fan
setting is Off.
Installation - Controls
1. To increase the room
temperature, press
To decrease the room
temperature, press
2. To confirm, press
wait 5 seconds. The display
will return to the home
screen.
1. Press or
select the heating/cooling
setting.
2. If in cooling mode, press
to change to heating
mode. If in heating mode,
press to change to
cooling mode.
3. Press or
select the heating/cooling
setting.
4. To confirm, press
wait 5 seconds. The home
screen will appear.
1. From the home screen,
activate the fan setting
menu by pressing
then .
2. Press or to choose
the desired fan setting.
3. When the symbol for the
desired setting appears,
confirm your choice by
pressing (the home
screen will appear).
.
.
or
to
to
or
and
49