Mitsubishi Electric MELSEC iQ-R C Series Programming Manual page 67

Function name
CCPU_ReadDevice
CCPU_ReadLinkDevice
CCPU_ReadMCUnitLabel
CCPU_ReadMCUnitLabelBit
CCPU_RegistEventLog
CCPU_Reset
CCPU_ResetDevice
CCPU_ResetWDT
CCPU_RestoreDefaultCCIEFBCy
cPrm
CCPU_SetDevice
CCPU_SetDotMatrixLED
CCPU_SetLEDStatus
CCPU_SetOpSelectMode
CCPU_SetRTC
CCPU_ShutdownRom
CCPU_StartCCIEFBDataAssuran
ce
CCPU_StartWDT
CCPU_StopWDT
CCPU_SysClkRateGet
CCPU_SysClkRateSet
CCPU_ToBuf
CCPU_ToBufHG
CCPU_UnlockFWUpdate
CCPU_UnmountMemoryCard
CCPU_WaitEvent
CCPU_WaitSwitchEvent
CCPU_WaitTimerEvent
CCPU_WaitUnitEvent
CCPU_WriteDevice
CCPU_WriteLinkDevice
CCPU_WriteMCUnitLabel
CCPU_WriteMCUnitLabelBit
CCPU_X_In_BitEx
CCPU_X_In_WordEx
CCPU_Y_In_BitEx
CCPU_Y_In_WordEx
CCPU_Y_Out_BitEx
CCPU_Y_Out_WordEx
Function
To read data from internal user devices and internal system devices of a C
Controller module.
To read data from the own station link devices of CC-Link IE Controller
Network module, CC-Link IE Field Network module, Ethernet module (when
CC-Link IE Field Network is selected), MELSECNET/H network module,
and CC-Link IE TSN module.
To read data from module labels of a C Controller module in word units.
To read data from the module labels of a C Controller module in bit units.
To register an event log in the event history of a C Controller module.
To reset the bus master CPU (CPU No.1).
To reset internal user devices and internal system devices (bit devices) of C
Controller module.
To reset the user WDT of a C Controller module.
To restore the operation parameter of cyclic transmission of CC-Link IE
Field Network Basic to the default value (which is set in the parameter).
To set internal user devices and internal system devices (bit devices) of C
Controller module.
To set a value to be displayed on the dot matrix LED of C Controller module.
To set the LED status of a C Controller module.
To set the operation selection mode of C Controller module.
To set the clock data (local time) of C Controller module.
To shut down the program memory and the data memory of a C Controller
module.
To start data assurance for one link scan of CC-Link IE Field Network Basic.
To set and start the user WDT of a C Controller module.
To stop the user WDT of a C Controller module.
To read the system clock rate specified with the CCPU_SysClkRateSet
function from the backup RAM.
To store the specified system clock rate in the backup RAM.
To write data to the CPU buffer memory of the CPU module (host CPU) and
the buffer memory of the intelligent function module which are mounted on
the specified module position. (TO instruction)
To write data to the fixed cycle communication area of the CPU module
mounted on the specified module position.
To remove the prohibition on the firmware update of a C Controller module.
To unmount the SD memory card and USB Mass Storage Class-compliant
device connected to a C Controller module.
To wait for an interrupt event notification from other CPUs.
To wait for a switch interrupt event of C Controller module to occur.
To wait for a timer event to occur.
To wait for an interrupt event notification from modules.
To write data to internal user devices and internal system devices of C
Controller module.
To write data to own station link devices of CC-Link IE Controller Network
module, CC-Link IE Field Network module, Ethernet module (when CC-Link
IE Field Network is selected), MELSECNET/H network module and CC-Link
IE TSN module.
To write data to module labels of a C Controller module in word units.
To write data to module labels of a C Controller module in bit units.
To read an input signal (X) in bit (1-point) units.
To read an input signal (X) in word (16-point) units.
To read an output signal (Y) in bit (1-point) units.
To read an output signal (Y) in word (16-point) units.
To output an output signal (Y) in bit (1-point) units.
To output an output signal (Y) in word (16-point) units.
Reference
Page 120 CCPU_ReadDevice
Page 121 CCPU_ReadLinkDevice
Page 122 CCPU_ReadMCUnitLabel
Page 124 CCPU_ReadMCUnitLabelBit
Page 125 CCPU_RegistEventLog
Page 126 CCPU_Reset
Page 127 CCPU_ResetDevice
Page 128 CCPU_ResetWDT
Page 129
CCPU_RestoreDefaultCCIEFBCycPrm
Page 130 CCPU_SetDevice
Page 131 CCPU_SetDotMatrixLED
Page 133 CCPU_SetLEDStatus
Page 134 CCPU_SetOpSelectMode
Page 135 CCPU_SetRTC
Page 136 CCPU_ShutdownRom
Page 137
CCPU_StartCCIEFBDataAssurance
Page 138 CCPU_StartWDT
Page 139 CCPU_StopWDT
Page 140 CCPU_SysClkRateGet
Page 141 CCPU_SysClkRateSet
Page 142 CCPU_ToBuf
Page 143 CCPU_ToBufHG
Page 144 CCPU_UnlockFWUpdate
Page 145 CCPU_UnmountMemoryCard
Page 146 CCPU_WaitEvent
Page 148 CCPU_WaitSwitchEvent
Page 149 CCPU_WaitTimerEvent
Page 150 CCPU_WaitUnitEvent
Page 152 CCPU_WriteDevice
Page 153 CCPU_WriteLinkDevice
Page 154 CCPU_WriteMCUnitLabel
Page 158 CCPU_WriteMCUnitLabelBit
Page 159 CCPU_X_In_BitEx
Page 160 CCPU_X_In_WordEx
Page 161 CCPU_Y_In_BitEx
Page 162 CCPU_Y_In_WordEx
Page 163 CCPU_Y_Out_BitEx
Page 164 CCPU_Y_Out_WordEx
2 FUNCTION LIST
2.1 C Controller Module Dedicated Functions
2
65