*1
Error code
Decimal
Hexadec
imal
-28661
900BH
-28662
900AH
-28663
9009H
-28664
9008H
-28665
9007H
-28666
9006H
-28668
9004H
-28669
9003H
-28671
9001H
-28672
9000H
*1 When the function of which the return value is a long-type, the value will be eight digits in hexadecimal.
228
Description
Inaccessible error
Inaccessible area was specified.
CPU number specification error
The specified CPU number is out of range or unavailable.
Base unit number specification error
The specified base unit number is out of range.
Data send area occupied
No registration data error
Data length error
Reply data stored error
Area number error
The specified area number, offset address, and mode are out of
range.
Module identification error
Processing code error
Corrective action
Review the specified offset and size.
• Review the specified CPU number.
• Check the operating status of the specified CPU module.
Review the specified base unit number.
Retry.
Reset the C Controller module, or turn the power OFF and ON.
Reset the C Controller module, or turn the power OFF and ON.
Resend the request.
Review the area number, offset address, and mode.
• Review the parameters.
• Check the specified module.
• Reset the C Controller module, or turn the power OFF and
ON.
Reset the C Controller module, or turn the power OFF and ON.