Subaru Crosstrek 2020 Manual page 71

2. You will find marks " " at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
Seat, seatbelt and SRS airbags/Child restraint systems
Remove the covers and locate the lower
anchorages (bars).
If it is hard to install the child restraint
system because the anchorage cover
returns to the original position, press the
anchorage cover to the seat cushion until it
is flat.
3. Remove the rear seat head restraint.
For details, refer to "Rear seats" F1-9.
CAUTION
Store the head restraint that has
been removed in the cargo area.
Avoid placing the head restraint in
the passenger compartment to pre-
vent it from being thrown around in
the passenger compartment in a
sudden stop or a sharp turn.
4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at " " marks on
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.
– CONTINUED –
1-37