Subaru Crosstrek 2020 Manual page 318

7-54
Starting and operating/Cruise control
! To increase the speed (by accelera-
tor pedal)
1. Depress the accelerator pedal to ac-
celerate the vehicle to the desired speed.
2. Press the "RES/SET" switch to the
"SET" side once. Now the desired speed is
set and the vehicle will keep running at that
speed without depressing the accelerator
pedal.
! To decrease the speed (by the "RES/
SET" switch)
Press the "RES/SET" switch to the "SET"
side and hold it until the vehicle reaches
the desired speed. Then, release the
switch. The vehicle speed at that moment
will be memorized and treated as the new
set speed.
When setting the displayed unit as
"MPH":
The set speed can be decreased 1 mph
(1.6 km/h) each time by pressing the "RES/
SET" switch to the "SET" side.
When setting the displayed unit as
"km/h":
The set speed can be decreased 1 km/h
(0.6 mph) each time by pressing the "RES/
SET" switch to the "SET" side.
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the "RES/SET"
switch to the "SET" side once. Now the
desired speed is set and the vehicle will
keep running at that speed without depres-
sing the accelerator pedal.