Displaying The Auto Start Stop System Status - Subaru Crosstrek 2020 Manual

Auto Start Stop OFF indicator light (yel-
low) (type B)
If the Auto Start Stop OFF switch is
pressed, operation of the Auto Start Stop
system will be disabled. The Auto Start
Stop OFF indicator light on the combina-
tion meter will then illuminate in yellow. If
the switch is pressed once more, the Auto
Start Stop system will turn on again. The
Auto Start Stop OFF indicator light will then
turn off.
While the engine is temporarily stopped by
the system, if the Auto Start Stop OFF
switch is pressed, the engine will be
restarted even if you do not release the
brake pedal.
NOTE
. If the engine is restarted when the
Auto Start Stop system is not opera-
tional and the ignition switch has been
turned to the "LOCK"/"OFF" position,
the Auto Start Stop system will turn on
again.
. Be sure to turn the ignition switch to
the "LOCK"/"OFF" position when leav-
ing the vehicle. Failure to do so could
result in the battery discharging.
! Auto Start Stop No Activity Detected
indicator light
Auto Start Stop No Activity Detected
indicator light (type A)
Starting and operating/Auto Start Stop system
Auto Start Stop No Activity Detected
indicator light (type B)
If the operational conditions are not met
when the vehicle is stopped, the engine
does not stop and the Auto Start Stop No
Activity Detected indicator light will illumi-
nate. It will turn off when the vehicle begins
to drive.
& Displaying the Auto Start
Stop system status
Approximate indications of the time that
the engine has been stopped by the Auto
Start Stop system and/or the amount of
fuel saved can be displayed on the multi-
function display (black and white) or
combination meter display (color LCD).
For details, refer to "Auto Start Stop time"
F3-45 or "Basic screens" F3-37.
7-59
– CONTINUED –