Certification For Immobilizer System - Subaru Crosstrek 2020 Manual

2-16
Keys and doors/Immobilizer
with push-button start system")
One key that has already been registered
is required in order to register a new key.
NOTE
If you lose a key, the lost key's ID code
still remains in the memory of the
vehicle's immobilizer system. For se-
curity reasons, the lost key's ID code
should be erased from the memory. To
erase the lost key's ID code, all keys
that will be used are required.
For details about new key registration
and erasing the lost key's ID code,
contact your SUBARU dealer.
& Certification for immobilizer
system
. For models with "keyless access
with push-button start system":
Refer to "Certification for keyless access
with push-button start system" F2-14.
. For models without "keyless access
with push-button start system":
– U.S.-spec. models
FCC ID: Y8PFJ16-2
CAUTION
FCC WARNING
Changes or modifications not ex-
pressly approved by the party re-
sponsible for compliance could void
the user's authority to operate the
equipment.
NOTE
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This de-
vice may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
– Canada-spec. models