Switching Power Status - Subaru Crosstrek 2020 Manual

Hide thumbs Also See for Crosstrek 2020:
Table of Contents

Advertisement

Instruments and controls/Push-button ignition switch (models with "keyless access with push-button start system")
& Switching power status
1)
Operation indicator
2)
Push-button ignition switch
The power is switched every time the
push-button ignition switch is pressed.
1. Carry the access key fob, and sit in the
driver's seat.
2. Shift the select lever (CVT models)/the
shift lever (MT models) into the "P"/"N"
position.
3. Press the push-button ignition switch
without depressing the brake pedal. Every
time the button is pressed, the power is
switched in the sequence of "OFF", "ACC",
"ON" and "OFF". When the engine is
stopped and the push-button ignition
switch is in "ACC" or "ON", the operation
indicator on the push-button ignition switch
illuminates in orange.
Power
Indicator color
status
Power is turned
OFF
Turned off
The following
systems can be
ACC
Orange
audio and ac-
cessory power
Orange
(while engine is
All electrical
stopped)
ON
systems can be
Turned off
(while engine is
running)
CAUTION
. When the push-button ignition
switch is left in "ON" (while the
engine is not running) or "ACC"
for a long time, it may result in
vehicle battery discharge.
. Do not spill drinks or other liquids
on the push-button ignition
switch. It may cause a malfunc-
tion.
. Do not touch the push-button
ignition switch with a hand soiled
with oil or other contaminants. It
may cause a malfunction.
. If the push-button ignition switch
Operation
does not operate smoothly, stop
the operation. Contact a SUBARU
off.
dealer immediately.
. If the push-button ignition switch
does not illuminate even when
used:
the instrument panel illumination
is turned on, have the vehicle
outlet.
inspected at a SUBARU dealer.
. If the vehicle was left in the hot
sun for a long time, the surface of
the push-button ignition switch
used.
may get hot. Be careful not to
burn yourself.
NOTE
. When operating the push-button
ignition switch, firmly press it all the
way.
. If the push-button ignition switch is
pressed quickly, the power may not
turn on or off.
3-7
– CONTINUED –

Advertisement

Table of Contents
loading

Table of Contents