Subaru Crosstrek 2020 Manual page 166

Hide thumbs Also See for Crosstrek 2020:
Table of Contents

Advertisement

3-26
Instruments and controls/Warning and indicator
Inside warning
Outside warning
chime
chime
Ding, ding ...
(intermittent)
Short beep
Ding
(2 seconds)
Short beep
(2 seconds)
Beep, beep, beep,
beep, beep
(5 times)
Long beep (60
Ding
seconds max.)
Ding, ding ...
(7 seconds)
Operation indicator
on push-button igni-
tion switch
The driver's door was opened while the
push-button ignition switch is "ACC" (in
CVT models, when the select lever is in
the "P" position).
The push-button ignition switch was
switched to "OFF" while the driver's door
is open.
Lockout warning:
An attempt was made to lock all doors
while the access key fob is left inside the
vehicle.
Access key fob lock-in warning:
The door lock sensor was touched while
the push-button ignition switch is "OFF"
and the access key fob is inside the
vehicle.
Door ajar warning:
The door lock sensor is touched while the
ignition switch is in the "OFF" position and
one of the doors including the rear gate is
opened.
Power warning:
The door lock sensor was touched while
carrying the access key fob, the push-
button ignition switch is in a position other
than "OFF" (in CVT models, when the
select lever is in the "P" position).
Access key warning:
The vehicle was driven while the access
key fob is not inside the vehicle.
Status
Switch the push-button ignition switch to
"OFF", or close the driver's door.
When exiting the vehicle, be sure to
switch the push-button ignition switch to
"OFF".
Close the driver's door.
Take out the access key fob from the
vehicle, and lock the doors.
The doors cannot be locked while the
access key fob is inside the vehicle.
A chirp sound will be heard, and all doors
will be unlocked.
Take out the access key fob from the
vehicle, and lock the doors.
If the access key fob is inside the vehicle,
the doors cannot be locked.
Close the doors securely and lock them.
If one of the doors including the rear gate
is opened, the doors cannot be locked.
Return the access key fob inside the
vehicle, or switch the push-button ignition
switch to "OFF".
If the push-button ignition switch is not
switched to "OFF", the doors cannot be
locked.
Carry the access key fob, and drive the
vehicle.
Action

Advertisement

Table of Contents
loading

Table of Contents