System/Usb; Control: Foot Switch And Control Change Device (Pedal/Midi) Settings; Midi: Midi Settings - Korg D1200 Owner's Manual

SYSTEM/USB

Control: Foot switch and control
change device (pedal/MIDI) settings
1 3
1. Pol(FootSwPolarity) ................................... [–, +]
Specifies the polarity of the foot switch.
Connect a foot switch (separately sold option: PS-1 or
equivalent) to the front panel [FOOT SWITCH] jack, and
set this parameter so that the "
you press the foot switch.
2. Func(FootSwFunction) ........................................
[PunchInOut, Play/Stop, Mark]
Selects the function that will be controlled by the foot
switch.
PunchIn-Out: Perform manual punch-in and punch-out
(i.e., switch between recording and playback).
Set the [TRACK STATUS] key of the desired track to
REC, and begin playback. Recording will begin the
moment you press the foot switch, and will end when
you press the foot switch once again. ( p.53)
Play/Stop: Switch between playback start and stop.
Press the foot switch to start playback, and press it again
to stop playback.
Mark: Register a mark. When you press the foot switch,
a mark will be registered at that time location.
While this tab page is displayed, the foot switch is used
to detect the polarity, and the function selected here will
not operate. Also, while recording tap tempo, the foot
switch will be used for tap tempo input regardless of the
setting you specify here. ( p.52)
3. Device(CtrlChgDevice)........................................
[Pedal, A.Touch, PitchBend, Velocity, NoteNum,
CC#000...119]
Selects the external device that will control one of the
D1200's internal effects. The effect you specify in "Ass"
can be controlled in realtime.
Pedal: An expression pedal will control the effect. Con-
nect an expression pedal (such as the separately sold
XVP-10 or EXP-2) to the [EXPRESSION PEDAL] jack,
and move the pedal to control the effect.
A.Touch, PitchBend, Velocity, NoteNum: MIDI after-
touch, pitch bend, velocity, or note number data will
control the effect.
Connect the MIDI OUT of an external MIDI device to
the D1200's MIDI IN connector, and transmit the appro-
priate MIDI data from the external MIDI device to con-
trol the effect.
CC (Control Change) #000...119: A MIDI control change
number will control the effect.
Connect the MIDI OUT of an external MIDI device to
the D1200's MIDI IN connector, and transmit the appro-
priate MIDI control change message from the external
MIDI device to control the effect.
4. Ass(CtrlChgAssign) ...............[ExpOff, InsEff1...4]
2

MIDI: MIDI settings

4
" symbol lights when
On the D1200 you can use MIDI to do the following things.
•
•
•
•
1. GlobalCh(GlobalChannel) ..................... [01...16]
2. ProgramChange: Trans ........................ [On, Off]
3. ProgramChange: Recv ......................... [On, Off]
4. ControlChange: Trans .......................... [On, Off]
5. ControlChange: Recv ........................... [On, Off]
Selects the insert effect that will be controlled.
The insert effect you select here will be controlled by the
specified "Device."
ExpOff: No insert effect will be controlled.
InsEff1, InsEff2, InsEff3, InsEff4: Insert effect 1, 2, 3, or
4 will be controlled respectively.
If the effect program you are using does not have a con-
trol function, the effect will not be controlled. ( p.127–)
1
Control effects ( p.44, 87)
Synchronize with a sequencer or other MIDI device
( p.51)
Switch scenes ( p.39)
Use control changes to control mixer parameters
Specifies the global MIDI channel.
If the D1200 is connected via MIDI to an external MIDI
device, the D1200 will be able to exchange MIDI mes-
sages with the external device if its "GlobalCh" is set to
match the MIDI channel of the external device.
Make this setting when you want to do the following
things.
• Set "Device" to a MIDI message other than "Pedal,"
and control an effect from an external device.
• Use program change messages to transmit or receive
D1200 scene changes.
Switches program change message transmission on/off.
Program change messages will be sent when you switch
scenes or execute a store or recall operation.
Switches program change message reception on/off.
When the D1200 receives a program change message, it
will switch scenes.
Switches control change message transmission on/off.
Control change messages will be transmitted when you
operate a mixer parameter.
Control change messages transmitted from the D1200
can be recorded on an external MIDI sequencer.
Switches control change reception on/off.
Control change messages recorded on an external MIDI
sequencer can be received by the D1200 to control the
corresponding mixer parameters.
For details on the parameters that can be controlled,
refer to the MIDI implementation chart ( p.160).
Reference
2
3
5
4
101