4.4. Using the Board Test System
4.4.1. Using the Configure Menu
Figure 9.
®
®
Intel
Arria
24
Arrow.com.
Downloaded from
This section describes each control in the Board Test System application.
Use the Configure menu to select the design you want to use. Each design example
tests different board features. Choose a design from this menu and the corresponding
tabs become active for testing.
The Configure Menu
To configure the FPGA with a test system design, perform the following steps:
1. On the Configure menu, click the configure command that corresponds to the
functionality you wish to test.
2. In the dialog box that appears, click Configure to download the corresponding
design to the FPGA.
10 SoC Development Kit User Guide
4. Board Test System
683227 | 2023.07.12
Send Feedback