Board Test System - Intel Stratix 10 GX FPGA User Manual

Hide thumbs Also See for Stratix 10 GX FPGA:

Table of Contents

UG-20046 | 2020.04.02

Send Feedback

6. Board Test System

Figure 18.

Quartus and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or

other countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in

accordance with Intel's standard warranty, but reserves the right to make changes to any products and services

at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any

information, product, or service described herein except as expressly agreed to in writing by Intel. Intel

customers are advised to obtain the latest version of device specifications before relying on any published

information and before placing orders for products or services.

*Other names and brands may be claimed as the property of others.

Arrow.com.

Downloaded from

The Intel Stratix 10 GX FPGA Development Kit includes a design example and an

application called the Board Test System (BTS) to test the functionality of this board.

The BTS provides an easy-to-use interface to alter functional settings and observe

results. You can use the BTS to test board components, modify functional parameters,

observe performance and measure power usage.

While using the BTS, you reconfigure the FPGA several times with test designs specific

to the functionality that you are testing. The BTS is also useful as a reference for

designing systems. The BTS communicates over the JTAG bus to a test design running

in the Intel Stratix 10 GX FPGA device.

The figure below shows the Graphical User Interface (GUI) for a board that is in

factory configuration.

BTS GUI

ISO

9001:2015

Registered

Table of Contents