Table of Contents
Advertisement
5.11.1. Power Distribution System
Figure 36.
5.11.2. Power Measurement
®
®
Intel
Arria
118
Arrow.com.
Downloaded from
The following figure below shows the power distribution system on the A10 SoC
development board.
Arria 10 SoC Development Kit Power Distribution Network Diagram
You can insert a DC1613A Linear Dongle into the J28 connector to collect voltage,
current, and wattage. 24-bit differential ADC devices are used to measure the on-
board power voltage, current, and wattage. Precision sense resistors split the ADC
devices and rails from the primary supply plane for the ADC to measure voltage and
2
current. An I
C bus connects these ADC devices to the MAX V CPLD EPM2210 System
Controller as well as the Arria 10 Soc FPGA.
10 SoC Development Kit User Guide
5. Board Components
683227 | 2023.07.12
Send Feedback
Advertisement
Table of Contents
