Board Test System - Intel Cyclone 10 GX FPGA User Manual

UG-20105 | 2017.12.18

5 Board Test System

The Intel Cyclone 10 GX FPGA Development Kit includes a design example and an
application called the Board Test System (BTS) to test the functionality of this board.
The BTS provides an easy-to-use interface to alter functional settings and observe
results. You can use the BTS to test board components, modify functional parameters,
observe performance and measure power usage.
While using the BTS, you reconfigure the FPGA several times with test designs specific
to the functionality that you are testing. The BTS is also useful as a reference for
designing systems. The BTS communicates over the JTAG bus to a test design running
in the Intel Cyclone 10 GX GX FPGA device.
The figure below shows the Graphical User Interface (GUI) for a board that is in
factory configuration.
Figure 9. BTS GUI
Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus
and Stratix words and logos are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services
at any time without notice. Intel assumes no responsibility or liability arising out of the application or use of any
information, product, or service described herein except as expressly agreed to in writing by Intel. Intel
customers are advised to obtain the latest version of device specifications before relying on any published
information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2008
Registered