Board Test System; Set Up Bts Gui Running Environment - Intel Agilex I Series User Manual

683288 | 2022.09.22
Send Feedback

4. Board Test System

The Intel Agilex I-Series FPGA Development Kit includes design examples and the
board test system (BTS) GUI to test the functionality of this board. The BTS provides
an easy-to-use interface to alter functional settings and observe results. You can use
the BTS to test board components, modify functional parameters, observe
performance, and measure power usage.
While using the BTS, you reconfigure the FPGA several times with test designs specific
to the functionality that you are testing. The BTS is also useful as a reference for
designing systems. The BTS communicates over the JTAG bus to a test design running
in the Intel Agilex I-Series FPGA device.
Figure 10
factory configuration.
Figure 10. BTS GUI

4.1. Set Up BTS GUI Running Environment

To run BTS GUI, including Power Monitor and Clock Controller GUI, you need to
download and install Java runtime including OpenJDK and OpenJFX on your systems
and set up the running environment. This is a one-time procedure, so if you have
already completed it before, you do not need to do it again unless the Java version
upgrade is needed.
Intel Corporation. All rights reserved. Intel, the Intel logo, and other Intel marks are trademarks of Intel
Corporation or its subsidiaries. Intel warrants performance of its FPGA and semiconductor products to current
specifications in accordance with Intel's standard warranty, but reserves the right to make changes to any
products and services at any time without notice. Intel assumes no responsibility or liability arising out of the
application or use of any information, product, or service described herein except as expressly agreed to in
writing by Intel. Intel customers are advised to obtain the latest version of device specifications before relying
on any published information and before placing orders for products or services.
*Other names and brands may be claimed as the property of others.
on page 22 shows the graphical user interface (GUI) of a board that is in
ISO
9001:2015
Registered