Sony Handycam Vision VideoHi8 CCD- TRV36 Operating Instructions Manual page 79

- CCD-TRV36/TRV43/TRV46 only
Tile buttons that have tile san-le name on tile Remote Commander as Oil the camrorder
flmction identically.
[]-
[]
[]
[] Transmitter
Point toward the remote sensor to
control the camcorder after turning on
the camcorder.
[] Video control buttons (p. 20)
[] DISPLAY button (p. 21)
[] START/STOP button (p. 11)
[] Power zoom button (p. 13)
Notes on the Remote Commander
• Keep the remote sensor away from strong light sources such as direct sunlight or
ilhunination. Otherwise, the remote control may not be effective.
• Be sure that there is no obstacle between the remote sensor on the camcorder and the
Remote Commander.
• This camcorder works in commander mode VTR 2. The commander modes (1, 2 and
3) are used to distinguish this camcorder f?'om other Sony VCRs to avoid remote
control misoperation. If you use another Sony VCR in commander mode VTR 2. we
recommend you change the commander mode or cover the remote sensor of the VCR
with black paper.
To prepare the Remote Commander
Insert two size AA (R6) batteries by matching the + and on the batteries to the
diagram inside the battery compartment.
0
79