Advertisement
1
Using EDITSEARCH, you can review the last recorded scene o1"check the recorded
picttu e in the viewfinder or on the LCD screen.
(1) Wtlile pressing the small green button on tile POWER switch, set it to
CAMERA.
(2) Turn STANDBY up to STANDBY.
(3) Press the
(@) side of EDITSEARCH momentarily;
tile last few seconds of the
recorded portion play back (RecReview).
You can monitor the sound fl'om the speaker or an earl)hone.
Hold down the
side of EDITSEARCH until the camcorder goes back to the
scene you want.
The last recorded portion is played back. To go fbrward, hold
down the + side (Edit Search).
o
3
To stop playback
Release EDITSEARCH.
To go back to the last recorded
point
after
edit search
Press END SEARCH. The last recorded point is played back for about 5 seconds (10
seconds in LP mode) and stops. Note that this f\mction does not work once you eject
the cassette after you recorded on the tape.
To begin
re-recording
Press START/STOP. Re recording begins fl'om the point you released EDITSEARCH.
Provided you do not eject the cassette, the transition between the last scene you
recorded and the next scene you record will be smooth.
19
Advertisement
