Sony Handycam Vision VideoHi8 CCD- TRV36 Operating Instructions Manual page 49

- CCD-TRV36/TRV43/TRV46 only
You can use the built in light to suit yore shooting situation. Tile reeon-unended
distance between tile subject and camcorder is about 5 fbet (1.5m).
While tile camcorder is in Standby n-lode, slide LIGHT to ON. Tile built in light turns
O11.
The built in light turns on/off by turning on/off STANDBY.
To stop using the built-in light
Slide LIGHT to OFF.
-r
©
To turn on the built-in light automatically
Slide LIGHT to AUTO.
The built in light automatically turns on and off"according to the ambient brightness.
However. if the btfilt in light turns on fi0rmore than about 5 minutes, it automatically
turns off. In this case. turn STANDBY down once and turn it up again.
Notes
• The battery pack is quickly discharging while the built in ligbt is turned on. Slide
LIGHT to OFF when not in use.
• When you do not use the camcorder, slide LIGHT to OFF and remove the battery pack
to avoid turning on the built in light accidentally.
• When flickering occms when you shoot white and bright subjects in AUTO mode,
slide LIGHT to ON.
• The built in light may turn on/off when you use the PROGRAM AE or BACK LIGHT
f\mction.
• When inserting or ejecting a cassette, the built in light may be turned off
g
0
o
I [@;_1]11 [t,]_) I
Be careful not to touch the lighting section, because the plastic window and
surrounding surfaces are hot while the light is on. It remains hot for a while after
the light is turned off.
I )mT.'l k_[_(If
Not to be handled by children.
Emits intense heat and light.
Use with caution to reduce the risk of fire or injury to persons.
Do not direct light at persons or materials from less than 4 feet (1.22 meters)
during use and until cool.
Slide LIGHT to OFF when not in use.
49