Sony Handycam Vision VideoHi8 CCD- TRV36 Operating Instructions Manual page 52

Connect tbe camcorder to your TV or VCR to watch the playback picture on the TV
screen. When monitoring tile playback picture by connecting the camcorder to your TV,
vve recolllll-lend you to use house current for the power source.
While playing back on a TV screen, close tile LCD panel. Otherwise, picture distortion
may
occur.
When connecting tile A/V connecting cable, make sure you connect tbe plug to jacks of
the same color.
Open tbe jack cover. With using the sui)plied A/V connecting cable, connect the
camcorder to the LINE IN inputs on the TV or VCR connected to the TV. Set the TV/
VCR selector on the TV to VCR. Wben connecting to the VCR, set the input selector on
the VCR to LINE.
VIDEO
AUDIO
7
@ VIDEO
@ AUDIO
: Signal flow
To connect to a TV or VCR without Video/Audio input jacks
Use an NTSC type RFU adaptor (not supplied).
52