Sony Handycam Vision VideoHi8 CCD- TRV36 Operating Instructions Manual page 65

1
(1) Remove the screw with a screwdriver (not supplied). Then, while sliding tlle
RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.
(2) Clean tile surface with a blower sold on tile market.
2
To reattach the eyecup
(1) Align the groove on tile eyecup with the • mark on the barrel.
(2) Turn the eyecup in the direction of file arrow. Then replace the screw.
2
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
0
65