Advertisement
You can create your own video program by editing with any other [] 8 ram, HI[] HiK
..... 11€ mini DV, I1¢DV, NiNVHS, SNiN S VHS, _
VHSC, S$iNIiit S VHSC, I_ Betamax
or _
ED Betamax VCR that has video/audio
inputs.
Connect
the camcorder
to the VCR using the supplied
A/V connecting
cable.
Set tbe input selector on tile VCR to LINE, if available.
Set EDIT to ON in the menu
system
(p. 29).
Turn
down
the volume
of the
camcorder
wl_ile
editing.
Otherwise,
picture
distortion
may
Occur.
(1) Insert a blank tape (or a tape you want to record over) into tim VCR, and insert
your recorded tape into the camcorder.
(:_) Play back the recorded tape on the camcorder until you locate the point just
before where you want to start editing, then press | | to set the camcorder
in
playback pause mode.
(3) On the VCR, locate the recording start point and set the VCR in recording
pause mode.
(4) First press || on the camcorder,
and after a few seconds press || on the VCR to
start editing.
To edit more
scenes
Repeat
steps
2 to _J.
To superimpose
the title
while
you are editing
You can superimpose the title while you are editing. Re%r to "Stq_erin-lposing a title"
(p. 44).
To stop editing
Press • on both the eameorder and the VCR.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro Edit feature
to the LANC {J_jack
of the camcorder,
using a LANC cable (not supplied),
the edit will be even more precise.
54
Advertisement
