Table of Contents
Advertisement
In Case of Diculty
Electrostatic discharge (ESD) on or near input connectors can damage circuits
C A U T I O N
inside the instrument. Repair of damage due to misuse is
warranty.
Before connecting any cable to the electrical input, momentarily short the
center and outer conductors of the cable together. Personnel should be
properly grounded, and should touch the frame of the instrument before
touching any connector.
Review the procedure being performed when the problem occurred. Before
calling Agilent Technologies or returning the unit for service, a few minutes
spent performing some simple checks may save waiting for your instrument
to be repaired.
5-2
What you'll nd in this chapter
This chapter provides a list of suggestions for you to follow if the plug-in module fails to operate. A
list of messages that may be display is also included.
For complete service information, refer to the optional
Agilent 83484A,B and 54752A,B Service Guide.
FINAL TRIM SIZE : 7.5 in x 9.0 in
Agilent 83483A, 54751A Service Guide
not
covered under
or the
Advertisement
Table of Contents
