Agilent 83484A,B and Agilent 54752A,B Vertical Specications
Bandwidth ( 3 dB)
dc Accuracy|single marker
1
26.5 GHz bandwidth
50 GHz bandwidth
dc Dierence|two marker accuracy on same channel
26.5 GHz bandwidth
50 GHz bandwidth
Transition Time (10%{90%) characteristic,
calculated from T=0.35/BW, electrical
26.5 GHz bandwidth
50 GHz bandwidth
RMS Noise
Typical
26.5 GHz
50 GHz
Maximum
26.5 GHz
50 GHz
Scale Factor
Minimum
Maximum
dc Oset Range
Nominal Input Impedance
It is recommended that a user vertical calibration be performed after every 10 hours of continuous use or if the temperature has changed by greater than 2
1
from the previous vertical calibration.
Where 1T
represents the temperature change in Celsius from the last user vertical calibration. Note that the temperature term goes to zero upon