Channel Setup Menu
Displaying the Channel Setup menu
To display the Channel Setup menu, press the
key.
4
Channel
5
Display
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
The Display softkey turns the channel display o and on. When the channel
display is on, a waveform is displayed for that channel, unless the oset is
adjusted so the waveform is clipped o of the display.
The channel number, vertical scaling, and oset are displayed at the bottom
left of the waveform area. They remain on the display until the channel
is turned o, or an automatic measurement is performed. The automatic
measurement results share the same area of the display as the channel
setups.
When the channel display is o, the waveform display for that channel is
turned o, pulse parameter measurements are stopped and acquisition on
that channel is stopped, unless it is needed as an operand for waveform math
functions.
Even though the channel display is o, you can still use the plug-in as a
trigger source or as a function source in the Math menu. However, the
instrument will not trigger unless one or more of the other channel displays
are turned on, or unless a math function is using one of the channels.
Key Path
NNNNNNNNNNNNNNNNNNNNNNN
Display
4
Channel
5
2-4
FINAL TRIM SIZE : 7.5 in x 9.0 in