External Scale
There is an External scale setting which allows the user to enter in an oset
value to compensate for gains or losses not associated with the device under
test. This feature is useful for adjusting out the eects of devices such as
test xtures and attenuators so that the reading on the display gives the
measurement value associated with only the actual device under test.
To adjust the external
1. Press the plug-in module's front-panel channel
scale
2. Press
3. Press
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
External scale
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
, and enter the appropriate values.
Attenuation
Figure 3-4. External Scale Menu
FINAL TRIM SIZE : 7.5 in x 9.0 in
, and set the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Atten units
Calibration Overview
User Calibrations
key.
SETUP
4
5
to \decibel".
3-13