General Safety Considerations
Before this instrument is switched on
W A R N I N G
grounded through the protective conductor of the ac power cable to a
socket outlet provided with protective earth contact.
Any interruption of the protective (grounding) conductor, inside or
outside the instrument, or disconnection of the protective earth terminal
can result in personal injury.
There are many points in the instrument which can, if contacted, cause
W A R N I N G
personal injury. Be extremely careful.
Any adjustments or service procedures that require operation of the
instrument with protective covers removed should be performed only by
trained service personnel.
If this instrument is not used as specied, the protection provided by the
W A R N I N G
equipment could be impaired. This instrument must be used in a normal
condition (in which all means for protection are intact) only.
Before this instrument is switched on,
C A U T I O N
has been adapted to the voltage of the ac power source.
Failure to set the ac power input to the correct voltage could cause damage to
the instrument when the ac power cable is plugged in.
Electrostatic discharge (ESD) on or near input connectors can damage circuits
C A U T I O N
inside the instrument. Repair of damage due to misuse is
warranty.
Before connecting any cable to the electrical input, momentarily short the
center and outer conductors of the cable together. Personnel should be
properly grounded, and should touch the frame of the instrument before
touching any connector.
x
FINAL TRIM SIZE : 7.5 in x 9.0 in
, make sure it has been properly
make sure its primary power circuitry
not
covered under