Mounting The Protection Cap; Removing The Protection Cap; Checking The Battery Discharge Plug Form Ring - KTM Freeride E-XC 2019 Owner's Manual

13.22

Mounting the protection cap

Note
Material damage Components damaged or destroyed by water or dirt.
–
Mount the protection cap after you have removed the KTM PowerPack.
13.23

Removing the protection cap

Note
Material damage Components damaged or destroyed by water or dirt.
–
Mount the protection cap after you have removed the KTM PowerPack.
13.24

Checking the battery discharge plug form ring

Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
–
Remove the KTM PowerPack. (
Main work
–
Check the battery discharge plug form ring. (
–
Mount protection cap
F01672-10
Main work
–
Remove protection cap
F01672-10
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
Condition
The KTM PowerPack has been removed.
The protection cap has been removed.
SERVICE WORK ON THE CHASSIS 13
p. 43)
p. 69)
p. 107)
1
with one hand.
1
with one hand.
p. 108)
p. 69)
p. 71)
71