Adjusting The High-Speed Compression Damping Of The Shock Absorber - KTM Freeride E-XC 2019 Owner's Manual

12 TUNING THE CHASSIS
12.4
48
E01037-10

Adjusting the high-speed compression damping of the shock absorber

Caution
Risk of injury Parts of the shock absorber will move around if the shock absorber is detached incorrectly.
The shock absorber is filled with highly compressed nitrogen.
–
Please follow the description provided. (Your authorized KTM workshop will be glad to help.)
Info
The high-speed setting takes effect during fast compression of the shock absorber.
–
Mount the protection cap. (
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber.
Main work
–
1
Turn adjusting screw
the last perceptible click.
Info
Do not loosen fitting
–
Turn counterclockwise by the number of clicks corresponding
to the shock absorber type.
Guideline
Low-speed compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
Finishing work
–
Install the shock absorber.
–
Remove the motorcycle from the lift stand. (
–
Install the KTM PowerPack. (
–
Lock the seat. ( p. 69)
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. (
–
Mount the protection cap. (
–
Raise the motorcycle with a lift stand. (
–
Remove the shock absorber.
p. 71)
p. 57)
( p. 68)
clockwise with a screwdriver as far as
2
!
18 clicks
15 clicks
12 clicks
( p. 68)
p. 57)
p. 108)
p. 43)
p. 107)
p. 71)
p. 57)
( p. 68)