Substances 25 - KTM Freeride E-XC 2019 Owner's Manual

Brake fluid DOT 4 / DOT 5.1
Standard/classification
–
DOT
Guideline
–
Use only brake fluid that complies with the specified standard (see specifications on the container) and that
exhibits the corresponding properties.
Recommended supplier
Castrol
–
REACT PERFORMANCE DOT 4
MOTOREX ®
–
Brake Fluid DOT 5.1
Coolant
Guideline
–
Only use high-grade, silicate-free coolant with corrosion inhibitor additive for aluminum motors. Low grade
and unsuitable antifreeze causes corrosion, deposits and frothing.
–
Do not use pure water as only coolant is able to meet the requirements needed in terms of corrosion protec-
tion and lubrication properties.
–
Only use coolant that complies with the requirements stated (see specifications on the container) and that
has the relevant properties.
Antifreeze protection to at least
The mixture ratio must be adjusted to the necessary antifreeze protection. Use distilled water if the coolant needs
to be diluted.
The use of premixed coolant is recommended.
Observe the coolant manufacturer specifications for antifreeze protection, dilution and miscibility (compatibility)
with other coolants.
Recommended supplier
MOTOREX ®
–
COOLANT M3.0
Fork oil (SAE 4) (48601166S1)
Standard/classification
–
SAE ( p. 140) (SAE 4)
Guideline
–
Use only oils that comply with the specified standards (see specifications on the container) and that exhibit
the corresponding properties.
Gear oil (SAE 80W/90)
Standard/classification
–
SAE ( p. 140) (SAE 80W/90)
Guideline
–
Use only gear oils that comply with the specified standards (see specifications on the container) and that
exhibit the required properties.
Semi-synthetic gear oil
Recommended supplier
MOTOREX ®
–
Gear Oil
−25 °C (−13 °F)

SUBSTANCES 25

137