KTM Freeride E-XC 2019 Owner's Manual page 92

14 BRAKE SYSTEM
90
–
Position new brake linings.
Info
Always change the brake linings in pairs.
F01678-01
–
Position retaining spring
–
5
Mount pin
Info
To make it easier to mount the pin, push the retainer
spring down.
Make sure the retaining spring is seated correctly.
–
Mount cotter pins
F01677-10
–
Operate the rear brake lever several times until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
–
Fill up the brake fluid to the level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
A00201-12
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. (
6
.
.
4
.
A
.
5 mm (0.2 in)
p. 137)
p. 108)
p. 69)