Rider's Seat Installation
Warning
Never ride the motorcycle with the
seat fasteners loose or removed, as
both seats will not be secure and may
move.
The rider's and passenger seats are
only correctly retained and supported
once the seat fasteners are correctly
tightened.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
To install the rider's seat:
Engage the seat's tongue under the
▼
fuel tank bracket.
B01239
1.
Tongue (rider's seat)
2.
Fuel tank bracket
Lower the rear of the seat until it
▼
aligns with the holes on the rear
subframe.
1
2
GENERAL INFORMATION
Install the two rider's seat fixings to
▼
the rear of the seat and tighten to
44 lbf in (5 Nm).
B01238
1.
Rider's seat fixings
2.
Rider's seat
Grasp the seat and pull firmly
▼
upwards to make sure that it is
securely retained.
Reinstall the passenger seat or seat
▼
cowl, see page 79.
1
2
81