Street Scrambler Seat Installation - Triumph Street Cup Owner's Handbook Manual

General Information
Remove the fastener
passenger seat to the luggage rack frame.
Lift the seat up from the back and
slide rearwards to remove it from the
motorcycle.
Rider's Seat Removal
To remove the rider's seat:
Remove the passenger seat if equipped.
1
1. Seat lock
Insert the ignition key into the seat lock
and turn it counterclockwise while
pressing down on the rear of the seat.
This will release the seat from its lock.
Lift the seat up from the back and
slide rearwards to remove it from the
motorcycle.
64
securing the

Street Scrambler Seat Installation

Warning
To prevent detachment of a seat
during riding, after installation always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured it
will detach from the lock.
If the seat is not correctly secured it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Rider's Seat Installation
To install the rider's seat:
Engage the seat's tongue under the fuel
tank.
Note:
• An audible click can be heard when
the seat is correctly engaged in the
lock.
Press firmly down in the center of the
seat to engage the lock.
Grasp the seat and make sure it is
securely retained.
Passenger Seat Installation
To install the passenger seat:
Make sure that the rider's seat is
correctly installed.
Align the front locating lugs on the
passenger seat to their locating slots on
the luggage rack subframe.