Headlight Adjustment
Speed Triple 1200 RR Only
The headlight unit can only be adjusted
vertically.
Before
headlight, check and correct the tire
pressures.
The
headlight
adjuster
directly under the headlight unit.
2
1
1.
Headlight bracket
2.
Headlight bracket alignment marks
3.
Fasteners
To vertically adjust the headlight:
Switch the ignition on. The engine
▼
does not need to be running.
Switch the headlight dipped beam
▼
on.
Loosen the two fasteners securing
▼
the headlight bracket to the intake
duct sufficiently to allow restricted
movement of the headlight.
Using the marks on the headlight
▼
bracket, adjust the position of the
headlight to give the required beam
setting. Each mark on the headlight
bracket represents 1°. Moving the
headlight bracket forwards will move
the headlight upwards. Moving the
headlight bracket rearwards will
move the headlight downwards.
adjusting
the
is
located
3
MAINTENANCE
Tighten
the
▼
fasteners to 35 lbf in (4 Nm).
Recheck
the
▼
settings.
Switch the headlights off when the
▼
beam settings are satisfactorily set.
Headlight Adjustment
Speed Triple 1200 RS Only
The headlight unit can only be adjusted
vertically. The vertical beams of the left
hand and right hand headlights can
only be adjusted together. Independent
adjustment
is
not
adjusting the headlight, check and
correct the tire pressures.
B01282
1.
Fasteners
2.
Front subframe alignment marks
3.
Front subframe
To vertically adjust the headlight:
Switch the ignition on. The engine
▼
does not need to be running.
Switch the headlight dipped beam
▼
on.
Loosen the two fasteners securing
▼
the
headlight
front
subframe
allow restricted movement of the
headlight.
headlight
bracket
headlight
beam
possible.
Before
3
1
2
bracket
to
the
sufficiently
to
163