Table of Contents
Advertisement
A lighting on/off switch is not installed
on this model. The tail light and license
plate light all function automatically
when the ignition is turned on. The
headlight will function when the ignition
is turned on and the engine is running.
Models without Daytime Running Lights
(DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
A lighting on/off switch is not installed
on this model. The position light, tail
light and license plate light all function
automatically
when
turned on. The headlight will function
when the ignition is turned on and the
engine is running.
the
ignition
is
GENERAL INFORMATION
Brake and Clutch Lever
Adjusters
Warning
Do not attempt to adjust the levers
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic
to gain familiarity with the new lever
setting.
Do not loan your motorcycle to anyone
as they may change the lever setting
from the one you are familiar with
causing loss of motorcycle control and
an accident.
An adjuster is mounted to both the
front brake and clutch levers. The
adjusters allow the distance from the
handlebar to the levers to be changed
to suit the span of the operator's hands.
63
Advertisement
Chapters
Table of Contents
