Triumph Speed Triple 1200 RR 2022 Owner's Handbook Manual page 30

GENERAL INFORMATION
30
Immobilizer/Alarm Indicator Light
This Triumph motorcycle is equipped
with an engine immobilizer which is
activated when the ignition switch is
turned to the OFF position.
Without Alarm Equipped
When the ignition switch is turned to
the OFF position, the immobilizer light
will flash on and off for 24 hours to
show that the engine immobilizer is on.
When the ignition switch is turned to
the ON position the immobilizer and the
indicator light will be off.
If the indicator light remains on it
indicates that the immobilizer has a
malfunction that requires investigation.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
With Alarm Equipped
The immobilizer/alarm
only illuminate when the conditions
described in
accessory alarm instructions are met.
Anti-lock Braking System (ABS)
Warning Light
When the ignition is switched
on, it is normal that the ABS
warning light will flash on and
off. The light will continue to flash after
engine start-up until the motorcycle
first reaches a speed exceeding 6 mph
(10 km/h) when it will go off.
Traction control will not function if
there is a malfunction with the ABS.
The warning lights for the ABS, traction
control and the MIL will be illuminated.
light
the genuine Triumph
If the ABS warning light is constantly
illuminated it indicates that the ABS
function is not available because:
The ABS has been disabled by the
▼
rider.
The ABS has a malfunction that
▼
requires investigation.
If the indicator light becomes illuminated
while riding,
ABS has a malfunction that requires
investigation.
Optimized Cornering ABS (OCABS)
(if equipped)
The warning light will flash slowly
if Optimized Cornering ABS (OCABS)
is switched off by the OFF-ROAD
or OFF-ROAD PRO riding modes. A
warning message will be shown in the
instrument display.
If the
illuminated at any other time while
will
riding it indicates that the ABS has a
malfunction that requires investigation.
If the ABS is not functioning, the brake
system will continue to function as a
non-ABS equipped brake system.
Do not continue to ride for longer than
is necessary with the warning light
illuminated.
Contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified. In this situation
braking too hard will cause the wheels
to lock resulting in loss of motorcycle
control and an accident.
it indicates that
warning light
Warning
the
becomes