Steering Lock Button; Power On/Off Position; Stop Position; Run Position - Triumph Speed Triple 1200 RR 2022 Owner's Handbook Manual

GENERAL INFORMATION
60

Steering Lock Button

For reasons of security and safety,
always make sure the steering lock
is on when leaving the motorcycle
unattended.
Any unauthorized
motorcycle
the rider, other road users and
pedestrians
damage to the motorcycle.
To lock the
handlebar fully to the left and press the
steering lock button.

Power ON/OFF Position

The Power ON/OFF position switches
the electrical
instrument display between on or off.
This allows access to the instrument
display without starting the engine.
Do not leave the switch in the Power
ON position for a long period of time
as this may cause damage to electrical
components and will discharge the
battery.

STOP Position

The STOP position stops the engine.
Note
Although the
stops the engine, it does not turn off
all the electrical circuits and may cause
difficulty in restarting the engine due to
a discharged battery.
Warning
use of
may cause injury
and may also
motorcycle, turn
circuits and
Caution
engine stop position

RUN Position

The engine start/stop switch must be in
the RUN position for the motorcycle to
operate.

START Position

The START position operates the electric
starter allowing for a quicker engine
the
start.
to
From the ignition off, press and hold the
engine start/stop switch in the START
cause
position with all the correct conditions
met, to start the motorcycle.
For more information, see the Starting
the
the Engine section.

HOME Button

The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button
the
to select between the main menu and
instrument display.
All messages
the instrument
acknowledged by pressing the Joystick
center before the HOME button can be
operated.
that appear in
display must be