Table of Contents
Advertisement
GENERAL INFORMATION
72
Do not use anti puncture fluid or any
other item likely to obstruct air flow
to the TPMS sensor's orifices. Any
blockage to the air pressure orifice of
the TPMS sensor during operation will
cause the sensor to become blocked,
causing irreparable damage to the
TPMS sensor assembly.
Damage
caused
anti
puncture
maintenance
manufacturing defect and will not be
covered under warranty.
Always
have
by your authorized Triumph dealer
and inform them that tire pressure
sensors are installed on the wheels.
An adhesive label is installed to the
wheel rim to indicate the position of
the tire pressure sensor.
Care must be taken when replacing
the tires to prevent any damage to
the tire pressure sensors.
Always
have
by your authorized Triumph dealer
and inform them that tire pressure
sensors are installed on the wheels.
Caution
by
the
use
fluid
or
incorrect
is
not
considered
your
tires
mounted
Caution
your
tires
mounted
The tire pressures shown on the
instrument panel indicate the actual
tire pressure at the time of selecting
the display. This may differ from the
inflation pressure set when the tires
are cold because tires become warmer
during riding, causing the air in the tire
to expand and the pressure to increase.
The cold inflation pressures specified by
Triumph take account of this.
The
tire
pressures
of
adjusted
when
and using an accurate tire pressure
a
gage. The tire pressure display on the
instruments must not be used when
adjusting the tire pressure. For the
recommended tire pressures, see the
Specification section.
Tire Pressure Sensor Batteries
When the battery voltage in a pressure
sensor is low, a message will be shown
in the instrument display and the
TPMS symbol or message will indicate
which wheel sensor has the low battery
voltage. If the batteries are completely
flat, only dashes will be shown in the
instrument
warning light will be on and the TPMS
symbol will flash continuously. Contact
your authorized Triumph dealer to have
the sensor replaced and the new serial
number recorded in the spaces provided
in the Sensor Serial Number section.
With the ignition turned ON, if the TPMS
symbol flashes continuously or the
TPMS warning light remains on there is
a fault with the TPMS system. Contact
your authorized Triumph dealer to have
the fault rectified.
must
only
the
tires
are
display,
the
red
be
cold
TPMS
Advertisement
Chapters
Table of Contents
