Headlight Adjustment; Headlight Replacement; Rear Light; Direction Indicator Lights - Triumph Bonneville Bobber Owner's Handbook Manual

Maintenance
Do not cover the headlight or lens with
any item likely to obstruct air flow to,
or prevent heat escaping from, the
headlight lens.
Covering the headlight lens during
operation with
luggage, adhesive
intended to alter
headlight beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is
not considered
defect and will not be covered under
warranty.
If the headlight must be covered
during use - such as taping of
the headlight lens required during
closed-course
headlight must be disconnected.

Headlight Adjustment

1
cjwn
1. Headlight assembly mounting bolt
116
Caution
items of clothing,
tape, devices
or adjust
or non genuine
a manufacturing
conditions -
To adjust the headlight beam:
• Always
handlebars are in the straight ahead
position.
• Vertical adjustment of the headlight
beam is controlled by loosening the
headlight assembly mounting bolts
and altering the position of the
headlight assembly.
the
• Retighten the headlight assembly
mounting bolt to 26 Nm.

Headlight Replacement

The headlight
maintenance
headlight unit must be replaced in the
event of the failure of the rear lights.

Rear Light

The rear
maintenance free LED units. The rear
the
light units must be replaced in the event
of the failure of the rear light.

Direction Indicator Lights

The direction indicator light units are
sealed, maintenance free LED units.
make sure that
unit is a
free LED unit.
light units are
the
sealed,
The
sealed,