Registering Information On The Main Screen In Scan Tx Mode Or Fax Mode - Konica Minolta bizhub c3350 Quick Start Manual

5.6 Registering a destination
[Internet Fax]
Settings
[No.]
[Name]
[Favorite]
[Index]
[E-mail]
[Details]
[Receiver RX Ability]
Tips
- To check the settings for a registered destination, select its registered name, then tap [Check Settings].
- To change the settings for a registered destination, select the registered name, then tap [Edit].
- To delete a registered destination, select its registered name, then tap [Delete].

Registering information on the main screen in Scan TX mode or Fax mode

1
Depending on the type of destination you want to register, tap [Scan to E-mail], [Scan to Folder], or
[Fax].
2
Tap [Address Reg.].
3
Tap [Input New Address], then tap the type of the destination you want to register.
4
Enter destination information, then tap [Register].
% The registered information is the same as that to be registered from the Utility. For details, refer to
page 5-21.
[Quick Start Guide]
Description
Destination registration number. The smallest available number that is not
used is automatically assigned.
Enter the destination name (using up to 72 characters).
Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorite], enabling you to easily specify a destination.
Select a corresponding character so that the destination can be index
searched by name.
Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
Enables you to check the E-mail address you entered in [E-mail].
Select [Compression Method] and [Resolution] respectively as the specifica-
tions of the original data that can be received on the destination device.
5
5-25