Index Detector Sensor Mounting Screw And Cable; Index Emitter And Index Detector Sensor Cables And Bundle - Tandon TM-100-1 Operating And Service Manual

I
MOUNTING /
SCREW
~~
Figure 5-16
Index Detector Sensor Mounting Screw and Cable
5.9.10
Place the new index detector sensor holder in the top of the chassis.
5.9.11 With a Phillips screwdriver, mount the index detector sensor holder to the chassis, using its mounting
screw, while holding the disk drive upside down.
5.9.12 After turning the disk drive upright, position all sensor cables (see Figures 5-15 and 5-17), and smooth
them out.
Figure 5-17
Index Emitter and Index Detector Sensor Cables and Bundle
5-20