Index Sensor's Retaining Screw And Adjustment - Tandon TM-100-1 Operating And Service Manual

NOTE
This allows the operator to reach inside the disk drive to move the
magnetic head.
1-
2
0
a:
u.
INDEX
SENSOR'S
RETAINING
SCREW
ADJUSTMENT
Figure 2-9
HEAD
MODULE
Index Sensor's Retaining Screw and Adjustment
2.4.1 .4 Apply power to the disk drive.
2.4.1.5 Select the disk drive with the control logic.
2.4.1.6 Insert a work diskette.
2.4.1.7 Write information on Track 34.
2.4.1.8 Read the information on Track 34.
2.4.1.9 Set up a dual-channel, wideband oscilloscope, as follows:
Channel A: Test Point 1
Channel B: Test Point 2
Ground: Test Point 10
2-10