Activity Led Assembly Retaining Collar And Led Grommet - Tandon TM-100-1 Operating And Service Manual

Figure 5-10
Activity LED Assembly Retaining Collar and LED Grommet
5.6.9 Install a new cable harness around the bundle of wires, including the new Activity LED Assembly
cables, that are located at the back of the drive motor (see Figure 5-9) .
5.6.10
5.6.11
Reinstall the Logic PCBA (see Section 5.2).
Verify that the front panel Activity LED Assembly operates by using a computer or an exerciser.
5-13