Advertisement
@ CLEAR Button
Used
to clear
the value of a specified
func-
tion on display.
Used when data must be modi-
fied or to correct
mistaken
data.
43 UP and DOWN Buttons
Used
to increase
or decrease
the value of a
specified
function.
They are convenient
in
setting
the level
to an optimum while monitor-
ing.
@ ENTER Button
Press
this key to enter data from the numeric
buttons.
Data will
not be entered
if this
button
is not pressed
before
the function
is
changed with a function
button.
d$ FUNCTION Buttons
R/T (Reverb Time) Function Button
Press
this button,
and the
"R/T"
function
indicator
to the left of the input
level meter
will
light.
Reverberation
time can now be
changed.
Monitoring
the change of the "REVERB
TIME" display
to the right of the input level
meter,
the reverberation
time value can be
changed with either
the ten numeric buttons,
or the "UP" and "DOWN" buttons.
DELAY 1 (E/R Delay 1) Function Button
Press
this button,
and the
DELAY
]
function
indicator
to the left of the input level meter
will
light.
Early reflection
delay data can
now be input or altered.
Monitoring
the
change of the "DELAY 1" display to the right
of the input level meter,
the Delay 1 time
value can be changed with either
the ten
numeric buttons,
or the "UP" and "DOWN"
buttons.
Do not forget to press the "ENTER"
button
last of all
if you wish
to enter a new
delay
time.
"Delay 2" data can be displayed on the "DELAY
1" display by recalling the "DELAY" of memory
number 19.
To do this,
first press the "DELAY
1" function
button,
and then numeric button
"2" and press the "DELAY 1" button again.
Memory Function
Button
Press this button,
and the "MEMORY" function
indicator
to the left of the input level meter
will
light.
The memory
number can now be
. changed.
Monitoring the change of the "MEMORY"
display
to the right of the input level
meter,
the memory number can be changed with either
the ten numeric buttons.
Press the "STORE"
button
to write
in the memory,
or the "RECALL"
button
to read data from the memory.
10 Memory Buttons
STORE (Write) Button
Used to write data into a memory.
Press
the
"MEMORY"
function button,
specify the memory
to be written
in with the ten numeric buttons
(RAM memories are numbers 31 to 90), and then
press
this button.
RECALL
(Read)
Button
Used to read data from a memory.
Press
the
"MEMORY" function button,
specify the memory
to be recalled
in with the ten numeric buttons
(both ROM and RAM memories,
numbers 1 to 90,
can be used),
and then press
this button
to
read
the data.
(2 REMOTE Button
Press
this button
to change
to remote control
operation.
When it is pressed,
the "REMOTE"
display
to the left of the input level meter
will
light up,
meaning
that operation
is now
possible with
the remote control
unit.
Press
it again,
and the display will
turn off,
Signaling
that operation
has returned
to the
front panel controls.
0% INPUT LEVEL Control
At 0, input gain will become 1 (nominal),
and
the output
level will be the nominal
output
level.
At this time, with a standard of +4dB,
the head room margin becomes +14 dB.
Advertisement
