Advertisement
Read
this section carefully,
and refer
to the panel
illustration
on page 12.
The following
three operations
can be performed
with
the remote control
unit:
А, Selection of one of the preset memories with the 8 "PRESET" keys (see steps 1 to 4); and
reading and modifying
the parameters
set in one of the 8 preset memories
(see steps 1 to
B. Recall from one of the 30 memories of the ROM, using the "M" memory key,
the "M" function
key,
and the ten-key numeric pad (see steps 1 to 4); or recall
and the modification
of
the parameters recalled
(see steps 1 to 7).
C. Using
the "P"
(panel)
key to set desired parameters
without utilizing presets or memories
(see steps 1 to 7).
].Power On
Turn on the power with the power switch on the front panel
of the main unit.
The LCD
will show the following display
for a few seconds
before
the data at the last power
down will be displayed.
YAMAHA
PROFESSIONAL
DIGITAL
FEWERBERATOR
REW-1
This, however,
is only when the "REMOTE"
indicator of the main unit is
on.
If it is
not,
see the next step.
2.Remote Selection
Press the "REMOTE" button to select remote control operation.
The "REMOTE"
indicator
on the front panel
will
light up,
and the data at the last power down will be displayed
on the LCD of the remote control
unit.
3. Adjusting the Input Level
There
is no control
for the adjustment
of the input level on the remote control
unit.
However,
if "IN" is selected with the "IN/OUT" key of the level meter,
the input level
can be monitored..
Adjust
the input level
with
the send
level control
of your console,
or the input level control
of the main unit.
24
Advertisement
