Advertisement
(D Power Switch
@ Monitor Volume Level Knob
(9 Headphone Jack
Stereo headphone jack for monitoring,
for use
with standard
stereo headphones
with an imped-
ance of 8 ohms or more.
(D Power Lamp (red)
(5) REMOTE Indicator
When this
indicator
is on,
the user can oper-
ate the remote control
unit
instead of the
controls
on the front panel of the main unit.
This
indicator
is turned on or off with
the
"REMOTE" button.
The function which
is under selection
with
the function buttons
in the upper right hand
corner
of the panel
is indicated
with
these.
(0 Input Level Meter
Input level
(from O to -60 dB) is divided into
16 levels
(LEDs).
Green
-60 to -18 dB
Orange
-15 to -3 dB
Red
clipping
level
The lowest level orange LED (-14dB)
is the
nominal
level.
-4
09
REVERB TIME Display
(9 E/R DELAY
(initial Delay) Display
This 3-digit LED indicator displays
the delay
time between
the direct sound and early re-
flections.
It can be selected up to 600 ms in
steps of 1 msec.
When
this delay changes,
delay 2 (the time between direct and subse-
quent reverberations)
will also change by the
same
amount.
dà MEMORY (Memory Number) Display
(D Numeric Buttons
(incl.
10 digits and
decimal point)
These buttons
are used
to change
the values
of
each function
("REVERB TIME,
DELAY 1, MEMORY").
The user can enter data while monitoring
the
display of the specified
function.
They can
also be used
to clear
the value of a specified
function on display,
or modify
the value or
when
incorrect
data must be corrected
(see (0
"ENTER Button").
Advertisement
