Advertisement
@The DIRECT ON Key
This key is in the "DIRECT"
section
of the
panel.
It is used
to select or cut off
the
input of direct sound.
Press
this key only
after having pressed
the "EDIT"
key located
in the upper right hand corner
of the unit.
When
the key is pressed,
and the LED lights,
direct sound
input
is allowed;
if it turns
off,
direct sound
input is cut off.
(&The DIRECT Sound Level
Indicator
This is the set of three LEDs in the "DERECT"
section
of the panel.
One of these
three
LEDs will
light when a memory
is called
up:
"D" When this LED lights,
the direct sound
level
of the memory
which has been called
up
is higher
than the level
indicated
by the
current
position of the control.
"ГІ" When this LED lights,
the direct sound
level
of the memory which has been called
up
is the same as the level
indicated
by the
current
position
of the control.
"«]" When this LED lights,
the direct sound
level
of the memory which has been called
up
is lower
than
the level
indicated
by the
current
position
of the control.
(ФТһе DIRECT Sound Level Control
Used
to control
the mixing
level
of direct
sound.
The direct sound
input is mixed with
early reflection
and subsequent
reverberation
input,
and the mixed output
is controlled
by
the "MASTER"
level control.
Set the direct
sound
level
with
the following procedure:
1.Press the "EDIT" key in the upper right
hand corner
of the unit.
2.Rotate the "DIRECT" sound level control
until
the LED in the center of the level
indicator
lights.
Now the direct sound
level
is ready
to be modified.
14
Advertisement
