Advertisement
(SECTION IV)
PRESET
ВЕЕ
Іо|І Іс!
Ф
oong
PANEL
P_
EDIT AUTO
@
MEMORY
Ci ГІ
LLLI.
M
STR
НСІ
(D PRESET Keys
These keys are
located at the top of the far
right column of the panel.
When
the unit
leaves
the factory,
they are pre-set with
ж See page 3l item 19.
19
(Q PANEL Keys
P
This key is used
to set parameters
without
utilizing
pre-set or memory data.
Press
this
key,
and the LED in the middle will
light.
At this
time parameters
indicated
by the cur-
rent settings
of keys and controls
can now be
set,
or modified
and set.
EDIT
This key is used
to modify preset or memory
data.
If the LED of the "P" key is still
lit,
this key cannot be used.
Press
this key,
and
the LED in the middle will
light.
At this
time,
parameters
are ready
to be edited.
AUTO
This key is used to turn all "AUTO" keys
on or off simultaneously.
It can be used
only when the LED of the "P" key is lit.
(& MEMORY Display
This
is a 2-digit LED indicator.
It will
display memory numbers from 1 to 99.
Memories from 1 to 30 have parameters already
set.
They can be recalled and used.
Adjusted data can be stored
in user-
programmable memories 31 to 99.
(4) MEMORY Keys
M (Memory) Key
This key is used
to recall
or store data
in a
memory.
Press
this key,
and whether or not
the "MEMORY "display is lit, the current mem-
ory number will be shown on the "MEMORY" dis-
play.
STR (Store) Key
This key is used to store adjusted
data
in a
memory.
Press the "M" key, specify the mem-
ory number (31 to 90) with the ten-key
numeric pad,
and finally,
press
this key.
RCL (Recall) Key
This key is used to recall
data
in a memory.
Press
the "M" key,
specify
the memory number
(1 to 90) with the ten-key numeric pad, and
finally,
press
this key.
Advertisement
