Advertisement
15
(SECTION П)
E/R MODE
EMEN
CLULLI,
ms
@ E/R MODE
(Early Reflection Mode
Select) keys
Used
to select one of the eight different
basic early reflection
modes after pressing
the "EDIT" key.
Selection of one of these
modes
is the first step made after recalling
a memory,
in order
to make early reflection
settings.
The eight modes are as follows:
ROOM
HALL-S
(small)
HALL-M
(medium)
HALL-L
(large)
RANDOM
REVERSE
PLATE
SPRING
CO —1 C5 Cn > CO bo — lJ
H Hd H H H H
Echo time patterns
for each mode are shown on
page 39.
The relationship between "ROOM
SIZE" settings
(1/8 to 8) and the actual
volume of the "ROOM"
(m) for each mode is
shown on page 40.
© ROOM SIZE Indicator
This is the set of three LEDs above the "ROOM
SIZE" selector.
It is used to indicate if
the room size value read from a memory
is
larger
than,
smaller
than,
or equal
to the
current setting of the "ROOM SIZE" selector
underneath
it.
(& ROOM SIZE Selector
Used to select one of the eight preset room
size values (1/8 to 8).
When the room size
setting
is changed,
early reflections
also
change.
When operating this selector,
first
press the "EDIT" key in the upper right hand
corner of the unit,
and then rotate
the selec-
tor in the direction
indicated
by the room
size indicator,
until
the LED in the center
of the indicator
lights.
Then,
the setting
can be changed
if desired.
(0 E/R NUMBER Indicator
This is the set of three LEDs above the "E/R
NUMBER" selector.
It is used to indicate if
the number of early reflections
read from a
memory
is larger
than,
smaller
than,
or equal
to the current setting of the "E/R NUMBER"
selector
underneath
it.
Advertisement
