Important Safety Information - Mira Advance ATL Installation & User Manual

Section
2
1. Warning!
1.1. Products manufactured by us are safe and without risk provided they are
installed, used and maintained in good working order in accordance with
our instructions and recommendations.
1.2. THIS APPLIANCE MUST BE EARTHED. ENSURE SUPPLEMENTRY
BONDING COMPLIES WITH THE "REQUIREMENTS FOR ELECTRICAL
INSTALLATIONS".
In accordance with the current edition of 'The Plugs and Sockets etc.
(Safety) Regulations' in force at the time of installation, this appliance is
intended to be permanently connected to the fixed electrical wiring of the
mains system.
1.3. DO NOT twist the individual cable cores of the live and neutral conductors,
as this will prevent them from entering the terminal block.
1.4. The shower unit must not be fitted where it may be exposed to freezing
conditions. Make sure that any pipework that could become frozen is
properly insulated.
1.5. DO NOT operate this appliance if it is frozen. Allow the appliance to thaw
before using again.
1.6. DO NOT operate this appliance if water leaks from the pressure relief
valve. Maintenance will be required before the appliance can be safely
used.
1.7. DO NOT fit any form of outlet flow control as the outlet acts as a vent for
the tank body. Only Mira recommended outlet fittings should be used.
1.8. There are no user serviceable components beneath the cover of this
appliance. Only a competent tradesperson should remove the cover.

Important Safety Information

4